I have a CRIMESTOPPER SP-402 ALARM REMOTE START installed. The white 4 pin DATA LINK cable that is supposed to connect to the EVO port on the alarm remote start did not fit and so I cut the clip off of the black 4 pin DATA LINK connector that supposedly goes into the ADS port of the CRIMESTOPPER ALARM REMOTE START module and plugged it into the EVO port. The connector did fit and I made sure the wires went in the port correctly as in the alarm remote start diagram. Did the programming on the bypass module as intended and I didn't get no blinking, off and on light,but just a steady red light. The truck did not remote start.